Video Conference Camera Common Problems in Use and Solutions
At present, more and more manufacturers are beginning to snatch video cakes from videoconferencing cameras, making the entire industry more complicated. At the same time, in the multiple and complex videoconferencing market, there are too many jagged videoconferencing camera products, leading to instability in the use of videoconferencing cameras. Below, we will take a look at the common problems and solutions for the use of videoconferencing cameras:
When the video conference system is used, after the power of the camera link is turned on, the video has no screen display. If such a problem occurs, the power supply of the video conference camera has a failure in the connection. In this case, Need to check the video conferencing system circuit on it. When the camera of the video conference system fails to perform self-checking when it is used or if noise occurs during use, the power supply may be loosened. If the power supply is not loose, the product has a problem and needs to be repaired.
When the videoconferencing system is in use, there is a phenomenon that the remote controller cannot control the camera. First, it is necessary to check whether the dialing code behind the camera is corresponding to the remote controller. It is also possible that the battery of the remote controller is out of battery or is operated. Too far, beyond the range that the remote can control.
The image of videoconferencing system appears when the pan/tilt rotates disappears. The main problem is that the power of the power supply is not large enough, or is caused by the poor contact of the video line, or it may be caused by the long distance of the video line and the weakened signal. If there is no image, you need to send the video conference camera back to the manufacturer for internal inspection.